Ionic Bonding of Atoms

If an atom (A) with one electron in the outermost shell reacts with an atom (B) with seven electrons in the outermost shell, then both can attain the octet structure if atom A donates its valence electron to atom B.

However, the electrical neutrality of the atoms is disturbed and B, with an extra electron, becomes a negatively charged ion (an anion), whereas A becomes a positively charged ion (a cation). The two ions are then attracted to each other by the electrostatic force between them, and an ionic compound is formed. The number of bonds that can be formed with other atoms in this way is determined by the valency.

Sodium has one electron in its outer shell; it is able to give this up to form the cation whereas chlorine, which has seven electrons in its outer shell, can accept one to form the anion, thus sodium chloride has the chemical formula NaCl (Fig. 1.).

Fig. 1. Ionic bonding.

Oxygen, however, has six valence electrons and needs to ‘borrow’ or ‘share’ two; since sodium can only donate one electron, the chemical formula for sodium oxide is Na2O.

Magnesium has two valence electrons and so the chemical formula for magnesium chloride is MgCl2 and for magnesium oxide MgO.

Thus, the number of valence electrons determines the relative proportions of elements in compounds.

The strength of the ionic bond is proportional to eAeB/r where eA and eB are the charges on the ions and r is the interatomic separation.

The bond is strong, as shown by the high melting point of ionic compounds, and its strength increases, as might be expected, where two or more electrons are donated.

Thus the melting point of sodium chloride, NaCl, is 801°C; that of magnesium oxide, MgO, where two electrons are involved, is 2640°C; and that of zirconium carbide, ZrC, where four electrons are involved, is 3500°C.

Although ionic bonding involves the transfer of electrons between different atoms, the overall neutrality of the material is maintained.

The ionic bond is always non-directional; that is, when a crystal is built up of large numbers of ions, the electrostatic charges are arranged symmetrically around each ion, with the result that A ions surround themselves with B ions and vice versa, with a solid being formed.

The pattern adopted depends on the charges on, and the relative sizes of, the A and B ions, i.e. how many B ions can be comfortably accommodated around A ions whilst preserving the correct ratio of A to B ions.

Covalent Bonding of Atoms

An obvious limitation of the ionic bond is that it can only occur between atoms of different elements, and therefore it cannot be responsible for the bonding of any of the solid elements. Where both atoms are of the electron-acceptor type, i.e. with close to 8 outermost electrons, octet structures can be built up by the sharing of two or more valence electrons between the atoms, forming a covalent bond.

For example, two chlorine atoms, which each have seven valence electrons, can achieve the octet structure and hence bond together by contributing one electron each to share with the other (Fig. 2a). Oxygen has six valence electrons and needs to share two of these with a neighbour to form a bond (Fig. 2b).

Fig. 2 Covalent bonding.

In both cases a molecule with two atoms is formed (Cl2 and O2), which is the normal state of these two gaseous elements and a few others. There are no bonds between the molecules, which is why such elements are gases at normal temperature and pressure.

Covalent bonds are very strong and directional; they can lead to very strong two- and three-dimensional structures in elements where bonds can be formed by sharing electrons with more than one adjacent atom, i.e. which have four, five or six valence electrons.

Carbon and silicon, both of which have four valence electrons, are two important examples. A structure can be built up with each atom forming bonds with four adjacent atoms, thus achieving the required electron octet. In practice, the atoms arrange themselves with equal angles between all the bonds, which produces a tetrahedral structure (Fig. 3). Carbon atoms are arranged in this way in diamond, which is one of the hardest materials known and also has a very high melting point (3500°C).

Fig. 3 Covalent bonding in carbon or silica to form a continuous structure with four bonds orientated at equal spacing giving a tetrahedron-based structure.

Covalent bonds are also formed between atoms from different elements to give compounds. Methane (CH4) is a simple example; each hydrogen atom achieves a stable helium electron configuration by sharing one of the four atoms in carbon’s outer shell and the carbon atom achieves a stable octet figuration by sharing the electron in each of the four hydrogen atoms (Fig. 4).

Fig. 4 Covalent bonding in methane, CH4.

It is also possible for carbon atoms to form long chains to which other atoms can bond along the length, as shown in Fig. 5. This is the basis of many polymers, which occur extensively in both natural and manufactured forms.

Fig. 5 Covalent bonding in carbon chains.

A large number of compounds have a mixture of covalent and ionic bonds, e.g. sulphates such as Na2SO4 in which the sulphur and oxygen are covalently bonded and form sulphate ions, which form an ionic bond with the sodium ions.

In both the ionic and covalent bonds the electrons are held fairly strongly and are not free to move far, which accounts for the low electrical conductivity of materials containing such bonds.

Metallic Bonding of Atoms

Metallic atoms possess few valence electrons and thus cannot form covalent bonds between each other; instead they obey what is termed the free-electron theory. In a metallic crystal the valence electrons are detached from their atoms and can move freely between the positive metallic ions (Fig. 6).

Fig. 6 The free electron system in the metallic bond in a monovalent metal.

The positive ions are arranged regularly in a crystal lattice, and the electrostatic attraction between the positive ions and the free negative electrons provides the cohesive strength of the metal. The metallic bond may thus be regarded as a very special case of covalent bonding, in which the octet structure is satisfied by a generalised donation of the valence electrons to form a ‘cloud’ that permeates the whole crystal lattice, rather than by electron sharing between specific atoms (true covalent bonding) or by donation to another atom (ionic bonding).

Since the electrostatic attraction between ions and electrons is non-directional, i.e. the bonding is not localised between individual pairs or groups of atoms, metallic crystals can grow easily in three dimensions, and the ions can approach all neighbours equally to give maximum structural density.

The resulting structures are geometrically simple by comparison with the structures of ionic compounds, and it is this simplicity that accounts in part for the ductility (ability to deform non-reversibly) of the metallic elements.

Metallic bonding also explains the high thermal and electrical conductivity of metals. Since the valence electrons are not bound to any particular atom, they can move through the lattice under the application of an electric potential, causing a current flow, and can also, by a series of collisions with neighbouring electrons, transmit thermal energy rapidly through the lattice.

Optical properties can also be explained. For example, if a ray of light falls on a metal, the electrons (being free) can absorb the energy of the light beam, thus preventing it from passing through the crystal and rendering the metal opaque. The electrons that have absorbed the energy are excited to high energy levels and subsequently fall back to their original values with the emission of the light energy.

In other words, the light is reflected back from the surface of the metal, which when polished is highly reflective. The ability of metals to form alloys (of extreme importance to engineers) is also explained by the free-electron theory.

Since the electrons are not bound, when two metals are alloyed there is no question of electron exchange or sharing between atoms in ionic or covalent bonding, and hence the ordinary valence laws of combination do not apply.

The principal limitation then becomes one of atomic size, and providing there is no great size difference, two metals may be able to form a continuous series of alloys or solid solutions from 100% A to 100% B. The rules governing the composition of these solutions are discussed in next articles.

Van Der Waals Bonds and the Hydrogen Bond

Ionic, covalent and metallic bonds all occur because of the need for atoms to achieve a stable electron configuration; they are strong and are therefore sometimes known as primary bonds.

However, some form of bonding force between the resulting molecules must be present since, for example, gases will all liquefy and ultimately solidify at sufficiently low temperatures.

Such secondary bonds of forces are known as Wan der Waals bonds or Wan der Waals forces and are universal to all atoms and molecules; they are however sufficiently weak that their effect is often overwhelmed when primary bonds are present. They arise as follows.

Although in Fig. 1 of previous article, we represented the orbiting electrons in discrete shells, the true picture is that of a cloud, the density of the cloud at any point being related to the probability of finding an electron there. The electron charge is thus ‘spread’ around the atom, and, over a period of time, the charge may be thought of as symmetrically distributed within its particular cloud.

However, the electronic charge is moving, and this means that on a scale of nanoseconds the electrostatic field around the atom is continuously fluctuating, resulting in the formation of a dynamic electric dipole, i.e. the centres of positive charge and negative charge are no longer coincident.

Fig. 7 Weak Van der Waals linkage between atoms
due to fluctuating electrons fields.

When another atom is brought into proximity, the dipoles of the two atoms may interact cooperatively with one another (Fig. 7) and the result is a weak non-directional electrostatic bond. As well as this fluctuating dipole, many molecules have permanent dipoles as a result of bonding between different types of atom.

These can play a considerable part in the structure of polymers and organic compounds, where side-chains and radical groups of ions can lead to points of predominantly positive or negative charges. These will exert an electrostatic attraction on other oppositely charged groups.

The strongest and most important example of dipole interaction occurs in compounds between hydrogen and nitrogen, oxygen or fluorine. It occurs because of the small and simple structure of the hydrogen atom and is known as the hydrogen bond.

When, for example, hydrogen links covalently with oxygen to form water, the electron contributed by the hydrogen atom spends the greater part of its time between the two atoms. The bond acquires a definite dipole with the hydrogen becoming virtually a positively charged ion (Fig. 8a).

Fig. 8 The hydrogen bond between water molecules.

Since the hydrogen nucleus is not screened by any other electron shells, it can attract to itself other negative ends of dipoles, and the result is the hydrogen bond. It is considerably stronger (about 10 times) than other Van der Waals linkages, but is much weaker (by 10 to 20 times) than any of the primary bonds.

Figure 8b shows the resultant structure of water, where the hydrogen bond forms a secondary link between the water molecules, and acts as a bridge between two electronegative oxygen ions. Thus, this relatively insignificant bond is one of the most vital factors in the evolution and survival of life on Earth.

It is responsible for the abnormally high melting and boiling points of water and for its high specific heat, which provides an essential global temperature control. In the absence of the hydrogen bond, water would be gaseous at ambient temperatures, like ammonia and hydrogen sulphide, and we would not be here.

The hydrogen bond is also responsible for the unique property of water of expansion during freezing i.e. a density decrease. In solid ice, the combination of covalent and strongish hydrogen bonds result in a three-dimensional rigid but relatively open structure, but on melting this structure is partially destroyed and the water molecules become more closely packed, i.e. the density increases.

Thanks for reading about “bonding of atoms.”

Related Posts


1 Comment

Leave a Reply

Avatar placeholder

Your email address will not be published.