• Book Name: RF and Microwave Circuits Measurements and Modeling 2nd Edition by Mike Golio and Janet Golio
  • Author: Mike Golio and Janet Golio
  • Pages: 774
  • Size: 28 MB

RF and Microwave Circuits Measurements and Modeling

Contents of RF and Microwave Circuits Measurements and Modeling

  1. Overview of Microwave Engineering
  2. Linear Measurements
  3. Network Analyzer Calibration
  4. Absolute Magnitude and Phase Calibrations
  5. Noise Measurements
  6. Nonlinear Microwave Measurement and Characterization
  7. Theory of High-Power Load-Pull Characterization for RF and Microwave Transistors
  8. Pulsed Measurements
  9. Microwave On-Wafer Test
  10. High Volume Microwave Test
  11. Large Signal Network Analysis/Waveform Measurements
  12. Receivers
  13. Transmitters
  14. Low Noise Amplifier Design
  15. Microwave Mixer Design
  16. Modulation and Demodulation Circuitry
  17. Power Amplifier Fundamentals
  18. Handset Power Amplifier Design
  19. Class A Amplifiers
  20. High Power Amplifiers
  21. Oscillator Circuits
  22. Phase Locked Loop Design
  23. Filters and Multiplexers
  24. RF Switches
  25. Monolithic Microwave IC Technology
  26. Bringing RFICs to the Market
  27. System Simulation
  28. Numerical Techniques for the Analysis and Design of RF/Microwave Structures
  29. Computer Aided Design of Passive Components
  30. Nonlinear RF and Microwave Circuit Analysis
  31. Computer Aided Design (CAD) of Microwave Circuitry
  32. Nonlinear Transistor Modeling for Circuit Simulation
  33. Behavioral Modeling of Microwave Power Amplifiers
  34. Technology CAD

Preface to RF and Microwave Circuits Measurements and Modeling

The first edition of the RF and Microwave Handbook was published in 2000. The project got off to an inauspicious start when 24 inches of snow fell in Denver the evening before the advisory board planned to hold their kick-off meeting. Two members of the board were trapped for days in the Denver airport since planes were not arriving or leaving. Because of road closures, one member was stranded only miles away from the meeting in Boulder.

And the remainder of the board was stranded in a Denver hotel 10 miles from the airport. Despite this ominous beginning, a plan was formed, expert authors recruited, and the book was developed and published. The planning and development of this second edition have been very smooth and uneventful in comparison to our first efforts.

Since publication in 2000, the value of the RF and Microwave Handbook has been recognized by thousands of engineers throughout the world. Three derivative handbooks have also been published and embraced by the microwave industry. The advisory board believes that this edition will be found to be of even greater value than the first edition.

Prior to the 1990s, microwave engineering was employed almost exclusively to address military, satellite, and avionics applications. In 1985, there were a few limited applications of RF and microwave systems that laymen might be familiar with such as satellite TV and the use of satellite communications for overseas phone calls. Pagers were also available but not common. In contrast, by 1990 the wireless revolution had begun.

 Cell phones were becoming common and new applications of wireless technology were emerging every day. Companies involved in wireless markets seemed to have a license to print money. At the time of the introduction of the first edition of the RF and Microwave Handbook, wireless electronic products were pervasive, but relatively simple, early generations of the advanced wireless products available today.

 At present, the number of people using wireless voice and data systems continues to grow. New systems such as 3G phones, 4G phones, and WiMAX represent emerging new wireless markets with significant growth potential. All of these wireless products are dependent on the RF and microwave component and system engineering, which is the subject of this book. During this time the military, satellite, and avionics systems have also become increasingly complex.

The research and development that drives these applications continues to serve as the foundation for most of the commercial wireless products available to consumers. This edition of the handbook covers issues of interest to engineers involved in RF/microwave system and component development. The second edition includes significantly expanded topic coverage as well as updated or new articles for most of the topics included in the first edition.

The expansion of material has prompted the division of the handbook into three independent volumes of material. The chapters are aimed at working engineers, managers, and academics who have a need to understand microwave topics outside their area of expertise. Although the book is not written as a textbook, researchers and students will find it useful.

Most of the chapters provide extensive references so that they will not only explain fundamentals of each field, but also serve as a starting point for further in-depth research.

Rf and microwave circuits measurements and modeling.


0 Comments

Leave a Reply

Avatar placeholder

Your email address will not be published.